![]() Procure fresh thermal paste and apply it to the surface carefully.Place the CPU appropriately in the position with all edges seated properly.If the processor is fine, then remove the thermal paste remaining on the CPU.If this is the case, you will have to replace the CPU.See underneath the CPU to find if any pins are broken or deviated.Take the fan out carefully after unscrewing and unlock the metal hinge holding the CPU in position.Unplug the connection of the fan from the motherboard.Open your computer casing’s cover after disconnecting all the cables.You will have to follow the instructions below to ensure the CPU is healthy and properly connected. As we have mentioned earlier, overheating the CPU or motherboard can be seriously hazardous.īut it is better if you check the physical condition of the processor as well. It is also possible that the thermal paste on your processor has vanished, raising the temperature. Again, this does not mean your CPU is corrupted.Īnother reason for your motherboard to not detect the CPU is if the processor is not properly seated in its position. If the red light still appears, then the motherboard probably cannot detect your processor yet. If the fan works and still the red LED flashes, let’s move on to the next solution. If that is the case, you should fix your motherboard’s fan port from the nearest service point. But if the fan worked well on another computer, then the port on your motherboard might be damaged.If the fan does not operate, then it’s probably faulty.If the fan does not work, connect your fan to the motherboard of a working computer and see whether it functions well.If the fan operates well, inspect whether the red LED blinks again.Run your computer to see if the fan works properly.Unplug the fan cable from the board if connected.Open the cover of your system’s casing.Disconnect the power supply to your computer.So, let’s look at how to inspect the fan’s health and connect it properly to the motherboard. Extreme heating up of the CPU is a really bad sign, and your system won’t function at all. When the CPU fan is not working, the processor will heat up much more than its threshold. If you tend to disassemble your system’s hardware, you might have forgotten to connect the fan back to its port. Sometimes, the connection might be loose, or the fan itself might be faulty. This can mostly happen if the fan over the CPU is not working as it should. But this does not mean that your CPU is damaged. If you find the red light blinking on the LED that indicates a CPU problem in the newer motherboard, it might be because the processor is not working well. Healthy Fan and Its Connection on Motherboard So, don’t panic, and please follow the step-by-step process, and you can have a problem-free system at the end. This will help narrow down the possible causes. You will have to perform a few simple diagnostic procedures first to ensure that the PSU or motherboard is not at fault. How to Fix Red Light on a MotherboardĮven though the causes behind the red light on your CPU look formidable, you can rectify most of these issues by taking care of a few things. Now that you are familiar with the possible causes, Let’s hop on to eliminate the issue causing the red CPU light to flash. Could not Detect Hard Drives or Operating System. ![]()
0 Comments
Leave a Reply. |